Imprint

according to § 5 DDG

Ingenieurbüro Lammers GmbH
Sonnenstrasse 1
83022 Rosenheim
Germany

E-Mail: blammers(at)lengineers.de

Managing directors: Bernhard Lammers, Christoph Köhrer, Michael Kratzert

Authorized representatives: Bernhard Lammers, Christoph Köhrer, Michael Kratzert

Commercial register: Traunstein HRB 11846

VAT-ID: DE199361670

Disclaimer:

Liability for content

The content of our website has been compiled with great care. However, we can assume no liability for the correctness, completeness or currency of its content. As a service provider, we are responsible for our own content on the site in accordance with general legislation, pursuant to § 7 para.1 of the German Telemedia Act (TMG). However, in accordance with §§ 8 to 10 of the TMG, we are not obliged as a service provider to monitor transferred or stored third-party information or to investigate circumstances suggesting illegal activities. Obligations to remove or block of the use of information in accordance with general legislation remain unaffected by this. However, liability in this respect shall only be possible from the moment that knowledge of a concrete infringement of law is obtained. Upon becoming aware of such infringements of law, we will remove such content immediately.

Liability for links

Our website contains links to external websites of third parties. We have no influence on the content of these. Therefore, we cannot accept any liability for such third-party content. Responsibility for the content of linked sites always lies with the relevant provider or operator. Linked sites were checked for potential legal infringements at the time of linking. No illegal content was identifiable at the time of linking. However, permanent monitoring of the content of linked sites is not reasonable without concrete evidence of an infringement of the law. Upon obtaining knowledge of infringements of law, we shall remove such links immediately.

Copyright

Content and work compiled by website operators on these pages are subject to German copyright law. Reproduction, processing, distribution and any other form of re-use beyond the scope of copyright law requires the written consent of the relevant author or creator. Downloads and copies of this website are only authorized for private use and not for commercial use. Where the content of this website has not been created by the operator, the copyright of third parties has been observed. In particular, third-party content is indicated as such. However, should you notice a breach of copyright, we would be grateful if you would notify us accordingly. Upon obtaining knowledge of infringements of law, we shall remove such content immediately.

1996 – 1999 Thomas Barth Bau- und Möbelschreinerei GmbH

  • » Carpenter training

2000 – 2001 Oberstufenzentrum Holztechnik Berlin-Treptow

  • » Advanced technical college entrance qualification / wood technology

2001 – 2002 Hochschule für Technik und Wirtschaft Berlin

  • » Specialization: Environmental Technology / Renewable Energies
  • » Basic studies: Mechanical Engineering, Electrical Engineering
  • » Advanced studies: Circular economy, recycling, renewable energies
  • » Study visits to Cuba and Tanzania
  • » Graduation Dipl.- Ing. Environmental Process Engineering

2009 – 2013 Ingenieure ohne Grenzen e.V. in Kooperation mit NRO MAVUNO Project (Tansania)

  • » Head of adapted technology development: research, development and implementation in Germany and Tanzania
  • » Project management research project Biogas support for Tanzania “BiogaST”
  • » Project management research project Carbonization and Sanitation “CaSa”
  • » Areas of responsibility in the partner country: Possibilities of energy supply through solar thermal energy, photovoltaics, biogas and biomass (wood gasifiers, pyrolysis)
  • » Head of knowledge transfer and practical training in Tanzania
  • » Supervision of student research projects in Germany

2017 – 2022 Becker & Bosse GbR

  • » General contractor for turnkey interior fittings
  • » Furniture construction
  • » Shopfitting

2022 – now Ingenieurbüro Lammers GmbH – L’ENGINEERS

  • » Consultant

2014 – 2016 German University of Technology in Oman

  • » Lecturer for sustainable planning
  • » Construction
  • » CAD

2016 – 2017 Technische Universität Berlin

  • » Course coordinator urban development

2018 Helmholtz-Zentrum für Umweltforschung – UFZ

  • » Project manager urban transformations

2018 – now Ingenieurbüro Lammers GmbH – L’ENGINEERS

  • » Consultant

2007 – 2009 Hilltop Asian Ltd.

  • » Purchasing accounting, responsible for China and Korea suppliers statements

2010 – 2011 Dongguan YULONG Electronic Material Co., Ltd.

  • » Chief secretary, responsible for daily business and human resources

2012 – 2013 ALBA INDUSTRIES Ltd.

  • » General manager assistant, coordination new projects and new orders from abroad

2014 – 2018 Dongguan Blueuniverse Laser Co., Ltd.

  • » Business manager for international market

2018 – now Ingenieurbüro Lammers GmbH – L’ENGINEERS

  • » Consultant

2014 – 2017 HOMAG Automation

  • » Project Engineer for Simulation Technology: Specialized in planning and designing factories, installations, and machine combinations.
  • » Project Studies: Creation of detailed project studies for preliminary analysis and design.
  • » Material Flow Analysis and Optimization: Focused on the analysis, design, and optimization of material flow systems.
  • » Expansion of Material Flow Simulation: Development and expansion of the material flow simulation area within the HOMAG Group.

2017 – 2021 DHL Sorting Center GmbH

  • » Expert in Simulation/Emulation and Software Development: Led the planning and design of simulation studies.
  • » Conducting Acceptance Tests for Complete Systems: Responsible for the successful acceptance testing of project installations.

2021 – 2023 DHL Sorting Center GmbH

  • » Senior Software Architect
  • » Design and implementation of material flow systems.
  • » Leadership of development teams to foster innovative software solutions.

2023 – now Ingenieurbüro Lammers GmbH – L’ENGINEERS

  • » Senior Software Architect

Main knowledge fields:

  • » Project management
  • » Coaching and Management
  • » Planning and conception of factories, plants and machine combinations
  • » ERP und MES, selection, implementation and optimization
  • » Material flow and process analytics / conception and optimization
  • » Product development
  • » Sustainability systems
  • » Management systems (ISO)

1991 – 1994 Texoprint BV

  • » Project Manager
  • » Planning

1995 – 2003 Tulp Keukens BV

  • » Project Manager
  • » Manager IT, Planning and Logistic

2003 – 2009 2020 Software Company

  • » International Sales Manager
  • » Sales Director Benelux

2009 – 2023 Bribus – Nobia AB

  • » Chief Operations Officer
  • » Manager Process and Product Development

2023 – now Ingenieurbüro Lammers GmbH – L’ENGINEERS

  • » Senior Consultant

1987 – 1990 Fischerwerke

  • » Studies Dipl. Ing. (BA) Mechanical Engineering

1990 – 1994 Homag

  • » Mechanical designer (special applications)
  • » Part-time study diploma industrial Engnieer (FH)

1995 – 2017 Homag Group Engineering

  • » Project manager in the field of flooring and other construction elements (doors, cement boards, insulation boards, etc.)
  • » Team leader machines for flooring
  • » Product management in the field of machinery / equipment for flooring
  • » Development of the production of double end profilers and technical support of the Homag plant in Shanghai (China)
  • » Customer consulting, concept finding and concept clarification
  • » Quotation preparation
  • » Support and advice from project start to project acceptance (in the above mentioned period about 640 production lines worldwide (only flooring)
  • » Field of activity worldwide with focus on China and SE-Asia

2018 – now Ingenieurbüro Lammers GmbH – L’ENGINEERS

  • » Senior Consultant

1992 – 1994 GWINNER WOHNDESIGN

  • » Head of department
  • » Installation of final assembly in new factory

1994 – 1995 GWINNER WOHNDESIGN

  • » Vice production manager
  • » Responsible for veneer cutting and component production; pre- and final assembly

1995 – 2007 GWINNER WOHNDESIGN

  • » Production manager
  • » Responsible for veneer cutting and component production; surface treatment; pre- and final assembly; maintenance
  • » Investment planning and implementation
  • » Implementation of new manufacturing technologies
  • » Appointment planning

2007 – 2014 Homag Group Engineering

  • » Project manager
  • » Responsible for the Chinese and East Asia markets
  • » Customer advice, concept design and clarification
  • » Analysis of work sequences and material flow optimizations
  • » Preparation of quotations
  • » Customer care and consulting from project start to final acceptance

2014 – now Ingenieurbüro Lammers GmbH – L’ENGINEERS

  • » Senior Consultant

2006 – 2011 SCHULER Business Solutions AG

  • » Consultant
  • » Planning of factories for the furniture industry as well as the production of prefabricated houses
  • » Reorganization of existing production
  • » Construction of the material flow simulation division in the HOMAG Group

2011 – 2015 HOMAG Group Engineering

  • » Project manager
  • » Planning and conception of factories, plants and machine combinations
  • » Preparation of project studies
  • » Material flow analysis / conception and optimization
  • » Expansion of the Material flow simulation division at the HOMAG Group
  • » Development of operational strategies

2015 – 2017 HOMAG GmbH BU Systems

  • » Manager technical sales
  • » Development of basic concepts for the furniture and construction industry
  • » Process project manager BU Systems
  • » Head of the team for material flow simulation

2017 – now Ingenieurbüro Lammers GmbH – L’ENGINEERS

  • » Senior Consultant

1990-1991 Hornberger Industrieanlagen GmbH

  • » Project engineer
  • » Planning of turnkey plants for the furniture industry

1991-1995 Lignacon GmbH

  • » Project engineer
  • » Planning of turnkey plants for the wood working industry
  • » Construction site manager at Sokol/RF

1995-2006 Ingenieurbüro Lammers GmbH

  • » Business owner
  • » Configuration of factories, plants and machine arrangements
  • » Factory and layout planning, general contractor for company planning
  • » Organization and work flow – determination and implementation
  • » Introduction of CIP
  • » Introduction of lean management methodologies for development of lines and workplaces
  • » Workplace design
  • » IT systems: selection and implementation
  • » Restructuring of companies
  • » Cost accounting and budgeting
  • » Management consulting

2006-2012 Homag Holzbearbeitungssysteme GmbH

  • » Head of Homag Engineering Department
  • » Department with 42 technicians / engineers running the project business within the Homag Group.

2010-2012 (in additional) Schuler Consulting

  • » Managing director
  • » Restructuring and realignment of Schuler Consulting

2013 – now Ingenieurbüro Lammers GmbH – L’ENGINEERS

  • » Managing director
  • » Consulting
  • » Continuing with the previous activities

Lorem ipsum dolor sit amet

Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet.